Cukurova University,Department of Textile Engineering, Main Branch of Textile Technology

November 20, 2024

Örme Kumaş Gözenekliliği ile Hava Geçirgenliği Arasındaki İlişkinin İncelenmesi


ÖZET: Bu çalışmada farklı yapı ve özellikte on iki adet 1x1 rib örme kumaş kullanılmıştır. Örme kumaşların hava geçirgenlikleri ölçülmüş ve mikroskop altında görüntüleri alınmıştır. Görsellerin MATLAB paket programında görüntü işleme teknikleriyle görüntü doku parametreleri analiz edilmiştir. Kumaş gözenekliliği ile ilgili sekiz farklı görüntü doku parametresi ve hava geçirgenliği arasındaki ilişki korelasyon analizi ile istatistiki olarak incelenmiştir. Aynı hammaddeden üretilmiş kumaşlarda kumaş gözenekliliği parametreleri ile hava geçirgenliği arasında güçlü bir ilişki bulunmuştur. Ancak farklı hammaddeler kullanıldığında bu güçlü ilişkinin azaldığı gözlenmiştir. Örme kumaşların hava geçirgenliği üzerinde iplik ve kumaş gözenekliliğine ek olarak lif özellikleri ve karışım oranının da etkileri tespit edilmiştir.

Investigation of the Relationship Between Porosity of Knitted Fabrics and Air Permeability

ABSTRACT: In this study, twelve 1x1 rib knitted fabrics containing different structure and features were used. Air permeability of knitted fabrics was measured and their images were taken under a microscope. Textural properties of images were analyzed with image processing techniques in MATLAB package program. The relationship between air permeability and eight different textural parameters of images related to fabric porosity were analyzed statistically with correlation analysis. A strong relationship was found between fabric porosity parameters and air permeability in fabrics produced from the same raw material. However, it was observed that this strong relationship decreased when different raw materials were preferred. The effects of fiber properties and blending ratio were determined on the air permeability of knitted fabrics in addition to yarn and fabric porosity.


*** Click here to download this article ***

Share:

November 17, 2024

Investigation of the oxidative selfpolymerization of dopamine under alkaline conditions on wool fabrics


Most studies about polydopamine in the textile field have been related to cotton fibers. There are not many studies about the use of polydopamine on wool fibers. A limited number of studies have focused on the coloring of wool, whereas wool is the fiber with the highest variety of intermolecular attraction forces among all natural and man-made fibers. 

Polydopamine contains high amounts of catechol and amine functional groups due to its structure. In this study, different from the literature, oxidative self polymerization of dopamine was achieved on wool fabric for different periods of time, and the coated fabrics were examined with characterization tests and spectrophotometrically. 

In this study, lower values were obtained than lightness (L*) values reported for other fibers in previous studies, and it was concluded that the wool-PDA interaction is superior to other fibers. Scanning electron microscopy and energy dispersive X-ray spectroscopy results showed that the polymerization and nano-coating formed successfully and continued to remain on the surface after washing. 

The lowest lightness value was obtained in the 32 h coating. However, the lowest color change after washing was in the 16 h coating (0.44%). This result showed that the coating was completed within 16–32 hours and there was only accumulation on the surface in the later times.


*** Click here to download this article ***

Share:

Akademik Dergiler Işığında Türk Üniversiteleri ve Akademisinin Dünyadaki Konumu




Ülkemizde bilime verilen değer her geçen gün artmaktadır ve üniversitelerimizin paydaşların beklentilerini karşılama noktasında eksiklikleri olduğu son dönemde sıklıkla belirtilmektedir.  Üniversitelerin bilgi üretme düzeyleri ve akademik performansları dünya çapında çok farklı kurum ve kuruluşlar tarafından yapılan akademik değerlendirmelerde, ilk 500’e ve ilk 1.000’deki üniversitelerimizin sayısının giderek azaldığı görülmektedir. Bu değerlendirmelerin ortak noktası, Web of Science  atıf dizinindeki makale sayısı ve atıf sayısı verilerini esas almalarıdır.  

Üniversitelerimizin ve Türk akademik hayatının dünyadaki konumunun iyileştirilmesine yönelik yapılan çalışma ve tartışmalarda, Türkiye adresli olarak yapılan yayınlar, atıflar ve projeler gibi birçok parametre araştırılmaktadır. Ancak Türk akademik hayatının dünyadaki konumunun incelenmesinde akademik dergilerimizin durumu ve konumu, göz ardı edilen bir konudur. Türk üniversitelerinin ve akademisyenlerinin durumunu, Türk akademik dergilerinin durumundan ayrı düşünmek mümkün değildir. Türk akademik dergi yayıncılığın durumu Türk üniversitelerinin dünyadaki konumunun gerilemesindeki önemli nedenlerden birisidir. 

Web of Science atıf dizininde yer alan Türkiye adresli  dergilerin sayısı ve nitelikleri, ülkemizin potansiyeli düşünüldüğünde hayli yetersiz düzeydedir. Türk akademik dergilerinde birçok problem göze çarpmaktadır. Bu kitapta akademik dergilerimizin  dünyadaki konumunun önemi incelenmiş, durum tespiti yapılarak nedenleri tartışılmış ve iyileştirilmesine yönelik önerilerde bulunulmuştur.

ISBN: 978-625-7667-04-3
Baskı Tarihi: Ocak 2021
EKİN Basım Yayın Dağıtım
Şehreküstü Mah. Cumhuriyet Cad.
Durak Sk. No: 2 Osmangazi / BURSA
Tel .: (0.224) 220 16 72 - 223 04 37
Fax.: (0.224) 223 41 12
e-mail: info@ekinyayinevi.com
www.ekinyayinevi.com
Share:

November 14, 2024

Fabrication of Cu2O plated carbon fabrics via electrochemical deposition method

Functional fabrics have many advanced applications to meet the expectations of the end-user industry. There is a variety of approaches to impart functional properties to the fabrics including coatings, the addition of functional fillers, surface modifications, etc. 

Metallization techniques are also a good candidate to impart functionalities to textile fabrics. On the other hand, Cu2O is a diamagnetic solid that has a variety of applications from flexible electronics to gas sensing. 

In this study, one of the simplest plating techniques, the electroplating method, was applied to carbon fabric to provide Cu2O coating on the surface which can add the advantages of metal oxides on carbon fabric. 

The Cu2O particles were observed on the surface of carbon fabric using SEM and the elemental composition of the surface was investigated using the EDS method. The crystal structure of the coating was identified using the X-ray diffraction technique and Raman spectroscopy. 

To confirm the achieved structure, FTIR analysis was performed as well. The newly fabricated structure can be a promising candidate for supercapacitors, electromagnetic shielding materials, dielectric surfaces, etc.

Share: